Holden Commodore V8 5.7 GEN III
3 Window Instrument Cluster extra modes

VT-VX-VU-V2-WH

Entering extra mode

To enter the extra function mode. With the ignition off, press and hold the MODE and the UP Arrow while turning the key to ignition on. Note: When my battery was low the voltage drop in starting was enough for the dash to reset so I had to hold the buttons until it was started.

v 11.9 990609 7566 p

1 v 11.9 Battery Voltage

2 990609 Software Date 09/06/1999

3 7566 p Part Number

press MODE for next page of info

v l 5.0 B V - - - 5.0 FUEL 1.2

1 v l 5.0 LPG Sender Voltage

2 B V - - - 5.0 Voltage for Button status (No buttons)

2 B V - - d 1.6 Down Button

2 B V - U - 2.5 Up Button

2 B V - U d 1.2 Up & Down Button

2 B V C U d 3.3 Mode & Up & Down Button

3 FUEL 1.2 Petrol Sender Voltage

press MODE for next page of info

p OFF temp 32°C InstFuel 0.0 l/h

1 p OFF Parkers On/Off

2 temp 32°C Coolant Temperature

3 InstFuel 0.0 l/h Instantaneous Fuel Consumption

press MODE for next page of info

Speed 0 km/h T 700 Remaining Fuel 18.5L

1 Speed 0 km/h Digital Speedo

2 T 700 Digital Tacho

3 Remaining Fuel 18.5L Try to guess

press MODE for next page of info

t NN XY

2 NN DTC Code 00 - 31 Use Up & Down arrows to step through

2 X DTC History status (H for active or - for inactive)

2 Y DTC Current status (C for active or - for inactive)

Dash DTC Code List
press and hold UP & DOWN Arrows for 3 seconds to reset codes in the Dash. Note: They will come back immediately if the codes are still being reported by other units.

press MODE for next page of info

Test all Lights and BUZZER

press MODE for next page of info

Back to the start